-4-
-5-
English
3) Scan for Bluetooth devices on your source
device and select MR260 to connect to it.
Once successfully paired, the status LED will
flash blue every 4 seconds.
4) To pair to a new device, press and hold the multi-
function button for 4 seconds to switch the
MR260 into pairing mode again. This can be done
either when a device is already connected to the
MR260 or when the MR260 is in reconnection
mode. In pairing mode, the status LED will flash
red and blue alternately.
Note: When the source device is switched off, the
MR260 will enter reconnection mode. The status
LED will flash blue twice per second and you will be
able to reconnect to any previous paired device. For
Android source devices, the MR260 will reconnect
automatically, for all other devices select the
MR260 from their Bluetooth device list.
For PC connections, Windows XP and Windows
Vista require third party software to connect to
Bluetooth speakers. If you are using a later version
of Windows and the MR260 is not outputting audio,
please check that the drivers for your PCs
Bluetooth module are up to date and that the Audio
Output source is set to the MR260.
5.3 Multi-Function Button
Whilst connected in either TX or RX Mode, press
the multi-function button to mute or unmute the
MR260.
When connected to a device or in reconnection
mode, press and hold the multi-function button for 4
seconds to reset the connection and enter pairing
mode again. The status LED will flash red and blue
alternately and you will be able to connect the
MR260 to a new device.
7. Specifications
Bluetooth Version v2.1 aptX Low Latency
Bluetooth Profile
Operating Range
Power Input
Internal Battery
Working Time
Charging Time
A2DP, AVRCP, PBAP
Up to 10m
DC 5V/180mA
3.7V/ 200mAh Li-polymer battery
Up to 8 hours
About 1.5 hours
Dimensions
Net Weight
50x35x13.7mm
20g
6. Charging
Connect the MR260 to a powered USB port using
the provided USB charging cable.
While charging, the status LED will light red and go
off once the battery is fully charged.
A full charge takes approximatively 1.5 hours
depending on power input.
To Next Page
Loading...
