auna multimedia Big Dazzle - Product Functions and Operation; FM Radio Mode; Bluetooth (BT) Connectivity; USB;SD Card Playback

14
Overall Functions
FM Radio
Press INPUT repeatedly to select the FM radio mode. Press SCAN to set o an automatic station scan. Use
CH+/- to select any desired station.
BT Operation
• Press INPUT repeatedly to select BT mode.
• Activate BT on your mobile device and connect to „M+AUDIO“. A short acoustic signal indicates the
successful connection attempt. The BT range is up to 10m.
USB/SD: MP3, WMV & WAV
• USB and SD card connections are plug&play ready. Just connect the respective USB drive or SD card
containing any audio les in one of the compatible formats (MP3, WAV, WMV).
• Press INPUT repetedly to select the respective mode.
• Use PLAY/PAUSE and / . for convenient navigation.
LINE/AUX
Use an audio cable to connect external audio sources to the device. Press INPUT repeatedly to select LINE.
Use the external device according to its instruction manual to play audio back on the BigDazzl.
Recording Function
• Press REC.PLAY to record the voice into the external memory like USB disc / SD card on the speaker.
If the external memory is rst time used, the system will automatically built a new folder name VOICE,
and recording les in it will be named REC001, REC002, and so on.
• In record mode, press REC.PLAY/INPUT to stop recording.
• Long press REC.PLAY to play the recordings in the external memory, press / to choose the
recordings to play.