40
EN
Inactive standby
You may set the radio to inactive and go to standby. The duration you can
choose as O/2 hours/ 4hours/ 5 hours/ 6hours.
Language
The default language is English. Change it as your preference. Available
languages: English, Danish, Dutch, Finnish, French, German, Italian,
Norwegian, Polish, Portuguese, Spanish, Swedish, Turkish.
Factory Reset
Resetting all user settings to default values, so that time and date, network
conguration and presets are lost. However, current software version of the
radio is maintained
Software Update
Auto-check setting: This option automatically checks for new updates from
time to time.
Automatic updating is enabled by default.
Check now: Search for available updates immediately.
You will be asked if you want to go ahead with download and installation of
an update. After a software upgrade, all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that the radio is plugged
into a stable
main power connection. Disconnecting power during an upgrade may
permanently damage the unit.
Setup Wizard
With this function, you can start the setup wizard at any time. Any
parameters or stations entered already are not deleted. For more
information, please read the Section 6.3 First-time setup.
Info
View the rmware version and the radio ID.
Privacy policy
View the information of Privacy Policy.
Backlight
You may change the backlight of each environment (power on level or
standby) to High, Medium, Low or Auto. And adjust the timeout duration
which the radio turns to standby backlight level when it has not been
controlled
To Next Page
Loading...
Need help?
General