Sound Adjustment
• Volume: Use the VOL+/- buttons to adjust the output volume. Press to mute/un-mute.
• Bass / treble: Press USER to enable the personal EQ setting. Then, use BASS+/- and TREBLE+/- to
adjust as desired.
• Preset EQ: Press EQ repeatedly to select from the EQ presets (CLASS, POP, ROCK, JAZZ or NORMAL).
BT
• Activate BT / BT pairing mode, pressing BT on the remote control or on the device top.
• Activate BT on your smartphone/tablet.
• Pair with AUNA STANFORD.
• To un-pair any connected BT device and return to pairing mode, press and hold PAIR. Alternatively,
change to another mode or deactivate BT on your smartphone/tablet.
• Use , , and to operate playback. You can also use your external media device to navigate
through your media library.
DAB Radio
When initially switching to DAB mode, a full scan for stations is performed automatically. You can perform
another scan any other time, again (which might be required after moving places or when stations seem to
have changed their transmission frequency).
Scan: Press MENU, then select FULL SCAN by using the arrow buttons. Press to conrm. After the station
scan, the radio returns to the station last tuned in, or to the station found rst in the band.
Prune: Select MENU -> PRUNE to remove all stations that are no longer available/receivable from the
stations list.
Stations list: When listening to DAB radio, press / to enter the stations list and scroll up/down.
Tune the highlighted station in with . Stations sending associated secondary services are marked with
a double chevron "<<".
Presets: You can save up to 40 stations to preset memory. Press and hold PROGRAM until "Preset Store"
appears on the display, along with the preset number. Presets are displayed either as empty or with the
currently stored station‘s name.
Use / to select the desired preset memory, then press to save the current station.
To recall previously saved stations, press PROGRAM, then select the station with / and tune in,
pressing .
To Next Page
Loading...
Need help?
General