Aunex AC2000.4D - Power Connection

10
Power Connection
For maximum current ow, Aunex recommends that you tin your
ground wire before connecting it to the ground terminal of your
amplier. In addition, Aunex recommends using high quality 100%
OFC (Oxygen Free Cooper) or Tinned 100% OFC speaker wire.
This will ensure that your speaker / subwoofer receives maximum
output from your amplier.
Connect to Source unit’s
accessory lead or
switched 12v source
Connect to
chassis ground
of vehicle. Keep
Grounds as short
as possible
See Specifications
for Fuse Rating
Fuse
Less
than 18”
Vehicle Battery
_
NEG
+
POS