Aunex AC2000.4D - Page 3

2
Feature Set of the AC Series 4 Channel Ampliers
• Heavy Density Aluminum Extruded Heatsink
• 4 Layer PCB, SMD Technology
• Conformal Coated PCB
• Dierential Balanced RCA Inputs
• Output Clipping Indicators
• Fully Variable Crossover 12dB/Octave Slope
• Frequency Multiplier x1 & x10 on HP Filters
• Dual Boost Circuitry Active in both HP and LP Modes
• Input Mode Selector (2Ch. or 4 Ch.)
• Autosensing in High Level Input Mode
o Remote Input Becomes Remote Output Trigger if
High level Input is used.
• Power and Protection Logo Illuminated Status Indicator
o Blue Indicates Amplier is powered On
o Red Indicates the Amplier is in Protection
• Blue Illuminated Power Input and Speaker Output Terminals
• 4 Gauge Power & Ground Terminals
• 8 Gauge Speaker Output Terminals
• Advance Protection Circuit Monitoring: Short, Thermal,
Overload and Impedance
• Finish: Anodized with Texture Paint
What’s Included
• (1) AC Series 4 Channel Amplier
• (1) In-Line Fuse Holder with Mini ANL Fuse
o AC600.4D is supplied with a 60A Fuse
o AC1000.4D is supplied with a 100A Fuse
o AC1500.4D is supplied with a 150A Fuse
o AC2000.4D is supplied with a 200A Fuse
• (4) Self Tapping Screws and (4) Washers
• (2) Allen Wrenches
• (1) Instruction Manual
• (1) Sticker