4
Mounting Placement
Choose a structurally sound location to mount your Aunex
amplier, making sure there are no items behind the area where
the screws will be driven.
For optimum sound quality, it is highly recommended that you
purchase Aunex wiring accessories as they are designed to give
your ampliers high-quality signal it needs to operate at peak
performance levels. Aunex provides a wide selection from
RCA cables and power wire to speaker wire and battery
connectors.
Important Installation Precautions Continued
• Install this product in a dry location away from your vehicles’
safety equipment. Each AC Series amplier circuit board has
been coated with a protective layer of Conformal Coating. This
will help protect the electronic circuit from harsh environments
that may contain humidity and a range of airborne contaminants
and varying temperatures. However prolonged exposure to
water and high humidity may damage internal components in
time. Keeping the amplier dry and installed in a well-ventilated
area will help ensure many years of listening enjoyment.
• When running power cables through sheet metal it is best to
use grommets and loom to properly insulate your cables from
metal edges.
• Avoid mounting the amplier with the top ns facing down as
this may increase the operating temperature of your amplier.
• If mounting underneath a seat, make sure that there is at least
1 inch (25mm) of space above the amplier to permit proper
cooling.
• Avoid mounting the ampliers on a subwoofer enclosure as
prolonged excessive vibration may damage your amplier.
To Next Page
Loading...
