3.4 Preparing for use
Check that the mattress is attached to
the mesh base properly.
3.5 Tips for use
A new mattress has a certain amount of
rigidity, which will disappear within a few
days.
4.1 Setting the Comfortslides
®
The mesh base can be adapted to the
shape of your body. The slides are
incorporated in the mesh base at both
shoulder and hip level.
• Remove the mattress from the mesh
base.
• The illustrations of the various
positions of the Comfortslides
®
are
examples only. You can of course set
the slides to the position you
consider the most comfortable.
• Lift the slides slightly, then slide
them to the desired positions.
• Replace the mattress on the mesh
base.
For technical reasons AVS mesh bases
wider than 120 cm cannot be equipped
with Comfortslides
®
.
4. Use
GB15
_03PI0_4458 BW.pdf - pag.15 November 12, 2009
LET OP !!! Lage resolutie!
To Next Page
Loading...
