Auping AVS - Troubleshooting Breakdowns

The table below gives possible solutions to malfunctions.
If you have any doubts contact your dealer.
5. Breakdowns
GB17
Cause Search Solution
Undesirable noises (bed
squeaks and creaks)
Caused by moving parts
touching each other.
Apply Teflon spray.
Do not use oil.
Undesirable noises (bed
squeaks and creaks)
The box spring is not
leveled because the
floor is not absolutely
flat.
Make sure the floor is
absolutely leveled.
Undesirable noises (bed
squeaks and creaks)
The reason for this may
be a missing part, or
parts that have not been
tightened properly or
have become loose when
the bed was moved.
Tighten parts.
Undesirable noises (bed
squeaks and creaks)
The bed is not
positioned away from
the wall.
Position the bed away
from the wall.
Undesirable noises (bed
squeaks and creaks)
There are unwanted
objects in the bed that
should not be there
(spoons, forks, pens,
etc.).
Remove those objects.
_03PI0_4458 BW.pdf - pag.17 November 12, 2009
LET OP !!! Lage resolutie!