13
Color select
Setting the color of the RGB backlight.
Spectrum
Frequency spectrum display, on/off.
Dimmer
Backlight dimming settings, on/off.
Dimmer timer - dimming the backlight by time.
DISPLAY - display settings
DSP Presets
You can save 6 independent settings (presets) and quickly switch between them.
IMPORTANT! Settings are retained when the battery power is turned off.
1. Adjust the EQ, delay and crossover settings.
2. Exit the "Audio" menu.
3. hold down the volume knob (encoder) for 3 seconds. “DSP KEYS” (“memory”)
will flash on the bottom line of the display.
4. To save the current settings to the memory cell "1", hold down the button "1"
for 2 seconds. “Preset 1” will appear on the bottom line.
5. Hold down the volume knob (encoder) for 3 seconds to exit the save settings mode.
6. Change the EQ, delay and crossover settings.
7. Exit the "Audio" menu.
8. hold down the volume knob (encoder) for 3 seconds. “DSP KEYS” (“memory”)
will flash on the bottom line of the display.
9. To save the current settings to the memory cell "2", hold down the button "2"
for 2 seconds. “Preset 2” will appear on the bottom line.
10. Briefly press the "1" button to recall the settings stored in "preset 1" ("preset 1").
11. Briefly press the "2" button to recall the settings stored in "preset 2" ("preset 2").
TUNER - radio function settings
Local seek
Local search, on/off
Stereo set
Stereo mode, on/off
To Next Page
Loading...
