18
Bluetooth music (A2DP)
The VENOM-D41DSP receiver supports Bluetooth audio transmission protocol.
After successfully pairing your mobile device with the receiver, you will be able to
play music from your phone on the car audio system.
To switch tracks, press the buttons (9) or (2) .
To stop playback, press the button (20) .
You can connect an external source to the 3.5mm jack on the front of the receiver
using an AurA AUX cable (sold separately).
AUX
Press and hold for 10 seconds. button (12) RST to reset the device to factory
settings.
Reset settings
Software update
We are pleased to offer the option to update the firmware to bring you the best
performance and the latest features for your device.
Please check the availability of the new software version on the website
www.aurael.ru
Most device settings are available in the AurA Audio mobile app for Android or iOS.
You can control the AMH-76DSP receiver from your smartphone:
1. Install the AurA Audio app from Google Play or the App Store.
2. Connect your smartphone to the receiver via Bluetooth.
3. Launch the AurA Audio app to control the receiver.
Phone app
Steering wheel button setup
This function can only be implemented in cars with resistive control buttons, the
common wire of the buttons is connected to the car's ground.
For the steering wheel buttons to work correctly, you must first connect the wires
of the standard control panel to the 3.5 mini-jack AurA SWC-001 adapter cable
(supplied separately).
The ground wire (WHEEL GND) of the standard control panel must be connected
to the black GND wire, and the WHEEL KEY A and WHEEL KEY B signal wires must
be connected to the K1 (red) and K2 (white) wires of the AurA SWC-001 cable,
respectively.
To Next Page
Loading...
