EasyManua.ls Logo

auragen G5000 - User Manual

auragen G5000
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MAIN INSTALLATION MANUAL
FOR AN AURAGEN
®
INDUCTION
POWER SOURCE
Vehicle Powered
Mobile Electric Power
Models G5000, G6000D, G6000X, G8500, G8500X
Aura Systems, Inc.
2335 Alaska Avenue, El Segundo, CA. 90245
Phone: (310) 643-5300 - Fax: (310) 643-7457 - Toll Free (800) 909-AURA
Web Site: www.aurasystems.com
Question and Answer IconNeed help?

Do you have a question about the auragen G5000 and is the answer not in the manual?

Summary

Functional Description of the AuraGen System

AuraGen Induction Power Source

This device resembles an oversized vehicle alternator, mechanically rotated by the engine to produce AC power.

AuraGen Electronic Control Unit (ECU)

The ECU converts AC power from the AuraGen to DC, then inverts and filters it to 120/240 volt single phase output.

Mounting Kit

Recommended and Required Tools and Materials for AuraGen System Installation and Test

Lists essential tools and materials needed for AuraGen system installation and testing.

AuraGen System Components

Warnings and Safety Precautions

Equipment Safety Guidelines

Safety measures for operating and handling the AuraGen system, including electrical connections and fluids.

Vehicle Exhaust Gases Hazard

Dangers of exhaust gases; emphasizes proper ventilation during operation and testing of the AuraGen system.

General Safety Precautions

Moving Parts Hazards

Electrical Shock Hazards

Connecting to Building Systems

Warning against connecting the AuraGen system directly to building electrical systems due to potential hazards.

Cable Routing

Connecting Power Output Cable to AuraGen

Electronic Control Unit (ECU) Mounting

ECU Installation Rules

Guidelines for ECU mounting regarding operating temperature, ventilation, and environmental protection to prevent overheating.

ECU Installation - Commercial

Rivnut Installation

Procedure for installing Rivnuts into drilled holes for securing the ECU, including swaging the Rivnut into place.

ECU Hookup Hardware

AuraGen and ECU Wiring Hookup

Signal Harness Installation

Signal Harness Connection at ECU

Output Power Wiring for AC Only ECU - 120;240

Hard Wired Output Power - 120;240 VAC, 40 Amp Service

Output Power Wiring for Inverter;Charger System (ICS)

DC Power and Ground for Inverter;Charger System

auragen G5000 Specifications

General IconGeneral
Brandauragen
ModelG5000
CategoryPortable Generator
LanguageEnglish

Related product manuals