To Next PageTo Next PageWhat to do if my AuraMist Fan is not misting?
If your AuraMist Fan isn't misting, there are several possible reasons. First, ensure the water faucet is turned on. Next, check that the ball valve is in the ON position. Also, verify that the misting valve is open (counterclockwise). Finally, the water filter might be clogged and require replacement.
How to fix AuraMist Fan when the misting fan is not running?
If the misting fan on your AuraMist Fan isn't running, first ensure the power cord is properly connected. If it is, check that the switch is not in the OFF position; switch the mist fan to high, medium, or low position.
What to do if mist is not balanced on three nozzles of AuraMist Fan?
If the mist is not balanced on the three nozzles of your AuraMist Fan, it could be due to low water flow. Try adjusting the water flow control valve. Also, check for water hose leaks by turning off the mist fan motor and feeling for any air leaks on the hoses.
Why is water streaming from the nozzle of my AuraMist Fan?
General| Type | Misting Fan |
|---|---|
| Fan diameter | 16 inches |
| Number of speeds | 3 |
| Model | AMMF16R-1 |
| Fan Speed Settings | Low, Medium, High |
Defines DANGER, WARNING, CAUTION levels for safety information.
Lists all components included in the fan's packaging with their quantities.
Controls fan speed via buttons for Low, Medium, High, or OFF settings.
Activates or deactivates the fan's oscillation function.
Details how to operate the misting feature, including water pressure requirements.
Provides advice for optimizing cooling effectiveness in different climates.
Outlines user duties regarding the maintenance schedule and procedures.
Details the process for replacing air and water filters for system maintenance.
