To Next PageTo Next PageWhat to do if my AuraMist Fan is not misting?
If your AuraMist Fan isn't misting, several factors could be at play. First, ensure the water faucet is turned on. Next, check that the ball valve is in the ON position. Also, verify the misting valve is open by turning it counterclockwise. Finally, the water filter may need replacing.
Why is my AuraMist Fan not running?
Your AuraMist Fan might not be running due to a few reasons. Check if the power cord is securely connected. Ensure the switch is not in the OFF position; try setting it to high, medium, or low. Lastly, the over current fuse might be blown, requiring a replacement.
What to do if water is streaming from the nozzle of my AuraMist AMMF16R?
If water is streaming from the nozzle of your AuraMist Fan, consider these possibilities. First, make sure the mist ON/OFF switch is turned on, as the air pump might not be working. If the airflow is low, try changing the intake filter of the air pump. Also, the air filter may need replacement. Check for air hose leaks by turning off the mist fan motor and feeling for any leaks on the hoses. Lastly, there might be a foreign object in the nozzle, in which case you should order and replace the nozzle.
General| Model | AMMF16R |
|---|---|
| Type | Misting Fan |
| Fan diameter | 16 inches |
| Number of speeds | 3 |
| Voltage | 220-240V |
| Frequency | 50Hz |
| Material | Plastic |
| Water Tank Capacity | 3.2L |
| Features | Remote Control, Oscillation |
Key safety guidelines for using the misting fan safely indoors and outdoors.
Controls for fan speed and oscillation.
Instructions for using the misting system with water supply.
Turning the misting feature on and adjusting mist density.
Procedure for turning off the misting feature and clearing the system.
User's role in following maintenance schedules and procedures.
Guidance on semi-annual replacement of air and water filters for system life.
