5
Quick Start
1. Connections
Connect the AC power cord to the AC socket on the rear panel (2) and power main using grounded
sockets and plugs. Do not turn on the power.
Connect the Ethernet port on the rear panel (7) to the router using an Ethernet (LAN) cable. The router
should be connected to the Internet and a computer, in order to receive updates and conveniently
transfer files.
Select one of the digital outputs (AES/EBU, optical, coaxial, BNC, USB) on the rear panel (3, 4, 5, 6)
and connect it to a DA converter or an amplifier with a digital input.
If you are connecting the dCS Paganini DAC and Master Clock, dCS Vivaldi DAC, Constellation pre-
amplifier, or MSB DAC to the Aurender W20, please refer to the following diagrams.
dCS Paganini and Scarlatti Master Clocks may also be connected through the USB ports for automatic
frequency selection.
dCS Vivaldi System (USB upsampling to DSD)
dCS Vivaldi System (Dual AES/EBU to DAC)
To Next Page
Loading...
