9
8. Copying Files to the Aurender
There are two ways to copy files to the Aurender’s HDD.
1. Use the Ethernet connection to copy files to the Aurender using a PC or Mac.
2. Connect a USB memory to the USB port on the rear panel.
Note: After song files are copied to Aurender, new songs will appear, only after the files are scanned and
the song database transferred to the iPad application. Files will be scanned automatically one minute after
additions or changes to the files.
PC Users
1. Press the Windows icon + R on your keyboard (START -> RUN). The following menu will pop up.
2. Type in two back slashes (\\) and the IP address of the Aurender. (For example: \\192.168.1.171). The
Aurender IP address can be found in NAS under SETTINGS on the iPad application.
3. Click OK and a window will appear with folders labeled ‘hdd1’ and ‘hdd2’. Click on a folder.
4. A popup window will ask for a Username and Password. They can be found in NAS under SETTINGS in
the iPad application.
5. Drag and drop files in to hdd1 or in its sub-folders.
6. Sub-folders may be created, renamed, or deleted. To add a sub-folder, right click on the white space
and go to New -> Folder.
Note: Importing large libraries can take a very long time Importing files in batches is advised.
Mac Users
1. Locate the Finder menu bar at the top of your desktop.
2. Click GO -> CONNECT TO SERVER from the navigation bar.
To Next Page
Loading...
