OPERATOR INTERFACE
AUTO Key:
1.Shortcut key to switch input signal source.
2.This key is an exit key (exit OSD menu) when OSD menu is active.
MENU Key Menu/Select :
Activate OSD menu or confirm function adjustment.
VOL-Volume control key:
1.Press this key to decrease volume.
2.Press this key to adjust the options to move left.
VOL+Volume control key:
1.Press this key to increase volume.
2.Press this key to adjust the options to move right.
UP KEY/ECO Adjustment Key:
When OSD menu is active, press this key to adjust the options
move up.
11
OSD menu is OFF. Press the button for 3 seconds and into
auto-adjustment function, but only on VGA mode.
3.Press the key, monitor will into automatic adjustment. When the
To Next Page
Loading...