CONNECT YOUR MONITOR TO YOUR
COMPUTER OR DEVICE
Plug in the Cable connecting your desktop, laptop or other device
to your monitor.
Using the Display Port will provide for best performance and resolution.
If Display Port is not available, we recommend using Dual Link DVI or
HDMI 1.4 device.
Notes:
• HDMI 1.4 device does support 2560 x 1440 (WQHD/WQXGA). But you have
to check your signal source & HDMI Cable both support HDMI ver.1.4
• Auria does not recommend using VGA for WQHD/WQXGA.
• If you are using the DVI or VGA video cable, be certain to tighten down the
grounding screws on the connector (on both ends of the video cable).
Turn on the source device then turn on the monitor (push power button on
the cabinet). For the best performance, use 2560 x 1440 (WQHD/WQXGA)
graphics’ mode (If supported by your graphics card).
7
To Next Page
Loading...