Auriol 300076 - Changing Basic Settings

22 GB/IE/NI
updates its time once daily via DCF signal. The reception pro-
cess is indicated with an animated DCF symbol
8
in the info
field
7
. If reception is successful the DCF symbol will be
static. If reception is unsuccessful the DCF symbol will disap-
pear until the next successful reception.
manually:
Press and hold the + / RCC
3
button for 3 seconds. The
flashing DCF symbol in the info field
7
indicates the prod-
uct is attempting to receive a signal.
Note: You may cancel reception by pressing the + / RCC
3
button again. The DCF symbol will then stop flashing.
Changing basic settings
Press and hold the MODE
2
button for 3 seconds to
access the basic settings mode from clock mode.
During each of the following programming steps press the
+ / RCC
3
or - / °C / °F
4
button to make a change.
TIP: Pressing and holding the + / RCC or - / °C / °F
button will quickly increase or decrease the numbers.
Press the MODE
2
button to confirm a setting. You will
automatically advance to the next programming step.