- 21 -
no foreign objects can enter the device;
candles and other open flames are kept away from this
equipment at all times to prevent the spread of fire.
Sudden temperature fluctuations can cause
condensation to form on the inside of the device. In this
case, allow the device to acclimatise for some time
before using it again in order to avoid short circuits!
Setup
Note: Due to the high power consumption, the device
may not be used on a PC or notebook.
Note: The device is only suitable for use with the
supplied power supply
(model no. HH0024Z-090200-AG).
Remove the protective film from the device's display.
Carefully pull the transparent plastic battery saver out of
the battery compartment .
Connect the power supply plug to the power supply
connector and connect the power supply to an
easily accessible outlet.
Qi® charging feature
Place the device to be loaded in the middle of the Qi®
charging area . If it functions properly, the green
indicator for charging will flash approx. 1x per
second. If the charging process is unsuccessful, the
indicator will flash faster.
Note: The product only supports devices with Qi®
wireless technology.
To Next Page
Loading...
