Aurora AU1085MA - Product Specifications; Installation Guide; Unpacking and Assembly; Power Connection and Placement

4 ENGLISH
INSTALLATION
PaperShredder
OperatingInstructions
Installation
Operation
Maintenance
Troubleshooting
Service Center
Limited Warranty
*ONEFOLDEDSHEETOFPAPEREQUATESTO2SHEETSOFPAPER
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
!
Caution:
Sheet Capacity
Paper Shred Size
Paper Entry Width
Credit Card Capacity
Duty Cycle
Voltage
10 Sheets of 20 lb. bond paper*
5/32 in. x 15/32 in. pieces
4 mm x 12 mm pieces
8.7 in / 220 mm
1 at a time
20 min. on / 45 min. off
120V~60Hz / 3.0 A
1. Make sure the basket door is securely closed shut. This shredder features a safety power cut off and
will not operate if door is open. Shredders with pull-out wastebaskets feature a safety power cut off
upon bin removal. The supplied wastebasket activates this switch, which allows the shredder to be
operable.
2. Attach 4 caster wheels to the bottom of the shredder body.
3. A socket-outlet should be near the equipment and be easily accessible.
4. Connect the power cord to any standard 120 volt AC outlet.
Microscut shredders have very sharp exposed blades on the underside.
• Shreds Credit cards, small paper clips, staples
Remove the shredder from the box.
1
Carefully lift and remove shredder head
and casters from the shredder body.
2