Need help?Do you have a question about the Aurora AU1415XA and is the answer not in the manual?
General| Cut Type | Cross-Cut |
|---|---|
| Sheet Capacity | 14 Sheets |
| Security Level | P-4 |
| Run Time | 5 Minutes |
| Cool Down Time | 30 Minutes |
| Auto Start/Stop | Yes |
| Overload Protection | Yes |
| Jam Protection | Yes |
| Shred Size | 0.16 x 1.38 inches |
| Can Shred | Staples, Paper Clips, Credit Cards |
Essential safety warnings and prohibitions for operating the shredder safely.
Warnings about flammable materials, oils, and chemicals around the shredder.
Key technical details including sheet capacity, entry width, and voltage.
Procedures for setting up the shredder, attaching casters, and connecting power.
Warning regarding sharp exposed blades on the shredder underside during mounting.
Explanation of the power switch modes: Auto/On, Off, Reverse, and Forward (Jam Remover).
Guidelines for feeding different media types into the shredder.
Explanation of the indicator lights for Power On, Overheat, Overload, Door Open, and Bin Full.
Reminders on removing clips, handling credit cards, overfeeding, and wastebasket management.
Instructions for monthly oiling of shredder blades to ensure optimal performance.
Guidelines for safely cleaning the shredder unit using a dry cloth and avoiding water.
Solutions for common problems like the shredder not operating or running only in reverse.
Step-by-step guidance on how to resolve paper jams using reverse and oil.
Troubleshooting steps for when the shredder stays in Auto mode continuously.
Details for contacting customer support for questions or spare parts.
Information on the warranty period and terms for cutting cylinders and other parts.
To Next Page
