Aurorae LP-10 - LED Control Panel

LED control panel
<MODE> Used to scroll through the current operating
mode, as well as back out of the current
menu option
<ENTER> Used to select a value and store it to memory
<UP> Used to select increasing advancement in the
value
<DOWN> Used to select decreasing advancement in the
value
AC/DC SWITCH
Using 100~240VAC
Put AC/DC switch at AC position when using AC input
Using battery pack/ 12VDC
Caution
Disconnect all AC power cord.
Do not use power linking on AC power when connecting to the battery pack.
Once disconnected, connect the battery pack power connector (included in package) to DC outlet.
The LED fixture must be disconnected from the battery when charging the battery.
Bracket/Yoke Assembly
The lock wash goes between the black plastic knob and the bracket. The flat washer is between the
bracket and the fixture.
MODE ENTER UP DOWN
AC
DC
DMX IN
DMX OUT
DC
POWE
R
A
C
IN
A
C OUT
LED DISPLAY AC/DC SWITCH
FUSE
MODE ENTER UP DOWN
AC DC
DMX IN
DMX OUT
DC POWER
INPUT
AC IN
A
C OUT
LED DISPLAY AC/DC SWITCH
FUSE
Ver 1.1
Page 3