Need help?Do you have a question about the AUSA C 250 H and is the answer not in the manual?
Details the intended applications and operating conditions for the forklift.
Outlines incorrect ways to use the forklift that could cause damage.
Specifies mast lifting heights, retracted/extended heights, and payload in inches.
Specifies mast lifting heights, retracted/extended heights, and payload in millimeters.
Details engine type, power, and related specifications for forklift models.
Covers transmission type, control, and hydraulic steering specifications.
Details the lifting capacity based on load center for different forklift models.
Details overhead guard specifications and compliance with safety standards.
Explains the parking brake activation and joystick functions for movement.
Instructions for operating mast lifting, lowering, tilting, and side-shift functions.
Explanation of various warning lamps and gauges on the multifunction instrument.
Procedure for starting the engine and essential pre-operation safety checks.
Explains nominal load, load center, and how to interpret load capacity charts.
Manages engine overheating, after-use care, and critical rollover safety procedures.
Operator duties, general driving advice, and safety recommendations.
Principles of stability, load handling, critical speed, and safe maneuvering.
Ensuring visibility, safe work areas, proper parking, and environmental care.
Steps for safely parking the machine and environmental protection measures.
Instructions for fastening, towing, and bypassing the hydrostatic pump for transport.
Details recommended fluids, lubricants, and their specifications for the forklift.
Covers general maintenance, daily checks, engine oil, filter, and coolant procedures.
Details maintenance for brakes, fuel filters, wheels, mast chains, and lubrication points.
Lists transmission errors, system reactions, and explanations of SAFE/LIMITED modes.
To Next Page
General
