Need help?Do you have a question about the AUSA C 500 H x4 and is the answer not in the manual?
Detailed measurements and lifting capacities of forklift models.
Graphs showing lifting capacity based on load center and height.
Explanation of forklift stability and load equilibrium.
Crucial safety rules for lifting and transporting loads.
Importance of overhead guard and safe parking practices.
Operation of inching, brake, accelerator, and travel controls.
Description of dashboard instruments and switch functions.
Explanation of gauges and warning lights on the instrument panel.
Steps for starting the engine and performing pre-operation checks.
Understanding rated capacity and load center influence.
Guidance on reading and applying load capacity charts.
Troubleshooting engine overheating and post-use cleaning.
Actions to take in case of forklift overturning.
Procedures for recovering overturned forklifts and storage preparation.
Comprehensive list of recommended fluids, lubricants, and capacities.
Detailed schedule for routine inspection, cleaning, and lubrication.
Locations for greasing and maintenance of axles.
Maintenance procedures for brakes, frame, and safety components.
Procedures for checking, topping up, and changing engine oil.
Steps for checking coolant level and draining the system.
Detailed electrical wiring diagrams for forklift systems.
Schematic of hydraulic system for various appliances.
Hydraulic circuit diagrams for the transmission system.
Table of common hydrostatic transmission failures and solutions.
General| Model | C 500 H x4 |
|---|---|
| Category | Rough Terrain Forklift |
| Load Capacity | 5000 kg |
| Engine Power | 55.4 kW |
| Weight | 8400 kg |
| Turning Radius | 3680 mm |
| Drive | 4x4 |
| Power Source | Diesel |
| Tire Type | Pneumatic |
| Lift Height | 3.5 m |
To Next Page
