Austro Engine AE50R User Manual

AE50R, AE50RA
AE50RAB
Engine Manual
Doc. No. E1.01.0-E Rev. 6 10-March-2011 Page 18-18
18.9 Engine mounting
The engine mounting points on the engine have been designed and tested to meet the
required 15 g load test. Engine location and fitting remain the responsibility of the aircraft
manufacturer. Contact Austro Engine GmbH for installation details.
18.10 Exhaust system
Exhaust design and fitting remains the responsibility of the aircraft manufacturer / engine
installer. Limitations must be regarded.
18.11 Air Filters
Supplied by Austro Engine GmbH as part of design. For other air filters Austro Engine GmbH
must be consulted.
18.12 Drive interface
The output shaft is parallel, fitted with a woodruff key for load transmission. For more details
contact Austro Engine GmbH.

Austro Engine AE50R Specifications

General

Brand	Austro Engine
Model	AE50R
Category	Engine
Language	English