Need help?Do you have a question about the Auta COMPACT DIGITAL 2H and is the answer not in the manual?
Details on installing the telephone as main or secondary unit.
Describes the process of receiving a call and conversing with the visitor.
Enables communication with panel or CCTV camera after initial setup.
Instructions for adjusting the monitor's call volume to medium or high.
Guide to selecting different ring tones for incoming calls.
Integrates house bell calls with outdoor panel calls using different melodies.
Mutes ringing tones for a selected period, indicated by LED flashes.
Monitors door status in real-time and provides visual alarms if the door is left open.
System incorporates management for two doors, controlling panel relays.
Steps for programming specific functions using the telephone's buttons.
General| Wiring | 2-wire |
|---|---|
| Operating Voltage | 24V DC |
| Frequency Response | 300 Hz - 3.4 kHz |
| Housing Material | ABS Plastic |
| Installation | Surface Mount |
| Type | Digital |
| Operating Temperature | -10°C to 50°C |
| Call Button | Yes |
| LED Indicator | Yes |
| Compatibility | Compatible with Auta systems |
To Next Page