AUTEC ACrs13-G RGA User Manual

AUTEC - Air series
Light signals 5
LIRGAE00-03
4.3 Plates on ACRS13-G and DCRS13 unit in a Multi Units or Multi Receiver
radio remote control
Plate Position Content
radio remote control
identi󰄈cation plate
On the cover of each
receiving unit.
Radio remote control serial number
(MULTI S/N), bar code and
manufacturing year.
receiving unit
identi󰄈cation plate
On the cover of each
receiving unit.
The serial number of the receiving unit
(S/N) and a bar code.
technical data plate
On the cover of each
receiving unit.
MODEL, TYPE and main receiving unit
technical data, marking and possible
radio remote control marks.
5 Light signals
5.1 POWER LED (green)
The POWER LED indicates the status of the receiving unit.
The POWER LED... Meaning
…is o󰓐 The receiving unit is not powered.
...is on Receiving unit is powered.
5.2 ENABLE LED (green)
The ENABLE LED indicates the status of the radio link.
The ENABLE LED … Meaning
… blinks once every 5 seconds The receiving and transmitting unit do not communicate.
… blinks fast
The unit is ready to receive commands sent by the
transmitting unit.

AUTEC ACrs13-G RGA Specifications

General

Brand	AUTEC
Model	ACrs13-G RGA
Category	Control Unit
Language	English