AUTEC Air series - Installation

24
LILK1E00-01
Operation
AUTEC - Air series
If the Enabling switch is used as a consent actuator, it shall be activated at the same time
as other actuators to send the corresponding command to the machine. The manufacturer of
the remote controlled machine and/or the installer of the radio remote control on the machine
de󰘰newhichactuatorswillneedtheactivationoftheEnablingswitchtosendcommandsto
the machine.
The Enabling switch can only be activated with hands. Any other activation
means (e.g. elastic band or tape) is inappropriate.