AUTEC C26PRO SERIES - Technical Data; General Technical Specifications; Transmitting Unit Specifications; Receiving Unit Specifications

- 15 -
LIPROMA3-00
- 15 Technical data -
15 TECHNICAL DATA
General
Working frequency ......................... 902 - 928 MHz in 9 sub-bands (3.2 MHz each)
Programmable radio channel ..............64 in any sub-band (manual selection mode)
...................... 16 groups of 8 frequencies in any sub-band (automatic scan mode)
Channel spacing...........................................................25 kHz (option 12.5 kHz)
Hamming distance......................................................................................
≥ 8
Probability of undetected error ............................................................... <10
-11
Typical working range............................................................................ 150 m
Passive emergency time.................................................................. 0.5/1.5 sec
Command response time................................................................ 70 - 120 ms
STOP command response time........................................................ 70 - 120 ms
Safety function category according to the EN 954 - 1
STOP protection..................................................................................... Cat. 4
Protection against unintended movements from standstill position
of the actuators ..................................................................................... Cat. 3
Transmitting
unit Number of available commands .................... 6+2 analog+12 on/off + start + stop
Antenna.............................................................................................. internal
Type of modulation.................................................................................. GFSK
Transmitting power (433 MHz)..............................................................<10 mW
Transmitting power (870 MHz).............................................................. < 5 mW
Power supply: battery pack ................................................... NiMH 7.2V - 1.3 Ah
Turn off voltage ..................................................................................... 6.0 V
Battery capacity with fully charged battery (at 20°C) ..................... about 10 hours
“Flat battery” warning................................................................... about 3 min.
Working temperature................................ (-5°F) - (+130°F) [(-20°C) - (+55°C)]
Housing ....................................................................................... PA6 fg 20%
Protection degree...................................................................... NEMA 4 [IP65]
Dimensions .................................... (9.3’’ x 6.3’’ x 6.8’’) [(263 x 160 x 173) mm]
Weight (with battery) .................................................................. 4.4 lbs [2 kg]
Receiving
unit Power supply.......................................................................8 - 30 Vdc (< 40W)
Antenna..............................................................................................external
Max rated current of STOP and SAFETY relay contacts.......................10 A (30 Vdc)
Max rated current of movement command relay contacts ................... 4 A (30 Vdc)
Max rated current of selection command relay contacts ...................... 6 A (30 Vdc)
Receiver sensitivity ........................................................ 0,5µV per 20 dB SINAD
Working temperature................................ (-5°F) - (+160°F) [(-20°C) - (+70°C)]
Housing ........................................................................................ PA6 fg 20%
Protection degree....................................................................... NEMA 4 [IP65]
Dimensions ....................................... (7.1’’ x 9.1’’ x 3.7’’) [(180 x 230 x 95) mm]
Weight..................................................................................... 6.2 lbs [2.8 kg]
Drilling template ..................................................................A = 5.8’’ [148 mm]
B = 4.6’’ [116 mm]
C = 10.0’’ [253 mm]
D = 10.0’’ [253 mm]
Battery
charger and
battery
Technical data inside the related manual