Autel Robotics X-Star - User Manual

Trademark Acknowledgement
X-Star™, Starlink™ and Starpoint™ are trademarks of Autel Robotics Co., Ltd.,
registered in China, the United States and other countries. The Autel
®
logo is a
trademark of Autel Intelligent Technology Corp., Ltd. registered in the United States
and other countries. All other marks are trademarks or registered trademarks of
their respective holders.
Copyright Warning
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, such as electronic, mechanical,
photocopying, recording, or otherwise, without the written permission of Autel
Robotics.
Disclaimer
All information, specications and illustrations in this manual are based on the
latest information available at the time of printing. The content of this manual is
subject to change. Autel Robotics reserves the right to make changes at any time
without notice. Please download the latest version from http://www.autelrobotics.
com. While information of this manual has been carefully checked for accuracy,
no guarantee is given to the completeness and correctness of the contents,
including but not limited to the product specications, functions, and illustrations.
When using the X-Star/X-Star Premium, always refer to and follow the safety
instructions in this manual. Autel Robotics takes no responsibility and accepts no
warranty for direct or indirect product damage or injury if the user fails to follow the
safety instructions. Autel Robotics will not be liable for any direct damages or for
any legal, special, incidental, indirect damages or for any nancial consequences
(including the loss of prots).
The safety instructions herein covers situations which Autel Robotics is aware
of. Autel Robotics cannot know, evaluate or advise you as to all of the possible
hazards. You must be certain that any condition or service procedure encountered
do not jeopardize your personal safety.
Safety Information
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully,
paying extra attention to the safety warnings and precautions.
For your own safety and the safety of others, and to prevent damaging the product
and its features, it is important for you to read and understand the instructions and

Summary

Safety Information

Flight Operations Basics

Take-off and Landing

Guidelines for safely taking off and landing the aircraft.

Battery Usage and Safety

Battery Use Instructions

Detailed instructions for the proper use of the aircraft battery.

Battery Charging and Storage

Battery Charging Guidelines

Procedures and precautions for charging the aircraft battery.

Getting to Know the Smart Drone

Built-in Smart Flight System

System Modules Explained

Details on the components of the smart flight system.

Smart Flight System Functions

Supported Flight Modes

Explanation of the different flight modes available.

Aircraft Battery Features

Smart Battery Features

Description of the battery's intelligent charge-discharge management.

The Xteady R12 Gimbal

Remote Controller Components

Command Sticks and Panel

Description of command sticks and flight information panel.

Remote Controller Calibration

RC Binding and Main Interface

Binding Aircraft and Controller

Process for pairing the aircraft with the remote controller.

Flight Information Panel Indicators

Indicator Light Definitions

Meaning and interpretation of the remote controller's indicator lights.

Preparing the Flight

Preparing the Aircraft Battery

Steps for installing and preparing the aircraft battery.

Aircraft Battery Installation and Charging

Battery Charging Process

Detailed instructions for charging the aircraft and remote controller.

Connecting Your Mobile Device

Mobile Device Connection and Compass Calibration

Calibrating the Compass

Procedure for calibrating the aircraft's compass.

Propeller Installation and Safety

Propeller Installation Steps

Instructions for correctly installing the aircraft propellers.

Flight Operations and Preflight Checks

Preflight Checklist

A comprehensive checklist before each flight.

Remote Controller Flight Operations

Motor Start-up and Take-off

Procedure for starting motors and initiating take-off.

Aircraft Take-off Methods

Command Stick Control Overview

Basic explanation of how command sticks control the aircraft.

Smart Flight Features Overview

Intelligent Orientation Control (IOC)

Go Home Functionality

Manual Go Home Control

Failsafe Procedures

Failsafe Conditions Explained

Starpoint Positioning System

System Performance and Limitations

Landing and Motor Shut-down

Manual Landing Procedure

Using the Starlink App

App Home Page Overview

Connecting to the Starlink App

How to Connect Mobile Device

Instructions for connecting your mobile device to the aircraft.

Starlink App Flight Controls

Flight Control Panel Functions

Starlink App Camera Controls

Camera Operation Panel

Camera Settings Details

Photo and Video Settings

Autopilot Modes Overview

Autopilot Functions

Orbit Mode Operation

Setting Orbit Parameters

Follow Mode Operation

Follow Mode Controls

Waypoint Mode Operation

Settings Menu Overview

Flight Control Settings

Remote Controller Settings

RC Calibration Procedure

Detailed steps for calibrating the remote controller.

Maintenance and Service

Firmware Upgrade Process

Step-by-step guide for updating the aircraft firmware.

Troubleshooting Tips

Common Operational Issues

Warranty Information

Warranty Coverage and Exclusions

Technical Specifications

Aircraft and Battery Specs

Autel Robotics X-Star Specifications

General

Brand	Autel Robotics
Model	X-Star
Category	Quadcopters
Language	English