11
l If the codes are not cleared, then an “Erase Failure. Turn
Key on with Engine off!” message displays.
C. Deactivate Brake
WARNING: Deactivate the EPB system before carrying out any
maintenance/service work on the brakes such as changing of pads,
discs and calipers!
Use proper tools to avoid the risk of body injuries of mechanics and
technicians and damage to the brake system.
Make sure the vehicle is properly blocked after deactivation of the
system.
1) To deactivate the EPB functions, use UP/DOWN button to select
Deactivate Brake from Select Function menu and press Y
button.
2) Wait a few minutes while the tool is deactivating the brakes.
When they are deactivated successfully, a “Deactivation Done!”
message comes up:
l If the tool fails to open the brake pads, a “Deactivation
Failed! Please try again!” message comes up.
- Verify that the ignition is ON;
......... Select Function ...... ...
3/5
1) Read Codes
2) Erase Codes
► 3) Deactivate Brake
4) Activate Brake
......... Deactivate Brake ...... ...
Deactivation Done!
Press any key to con.
To Next Page
Loading...