Autel MaxiCOM Ultra Lite User Manual

i
Trademarks
Autel
®
, MaxiCOM
®
, MaxiDAS
®
, MaxiScan
®
, MaxiTPMS
®
, MaxiRecorder
®
, and MaxiCheck
®
are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United
States, and other countries. All other marks are trademarks or registered trademarks of their
respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or transmitted in any
form or by any means electronic, mechanical, photocopying, recording, or otherwise without
the prior written permission of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the latest
information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While information of
this manual has been carefully checked for accuracy, no guarantee is given for the
completeness and correctness of the contents, including but not limited to the product
specifications, functions, and illustrations.
Autel will not be liable for any direct, special, incidental, or indirect damages, or for any
economic consequential damages (including lost profits) as a result of using this product.
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully, paying extra
attention to the safety warnings and precautions.
For Services and Support:
pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North America)
0086-755-86147779 (China)
support@autel.com
For details, please refer to the Service Procedures in this manual.

Autel MaxiCOM Ultra Lite Specifications

General

Operating System	Android
Memory	4GB RAM
Connectivity	Wi-Fi, USB
Camera	Rear camera
Sensors	Gravity Accelerometer, Ambient Light Sensor
Audio Input/Output	Microphone
Power and Battery	Rechargeable lithium-ion battery
Protocols	J2534
Diagnostic Functions	coding

Summary

Safety Information

Safety Messages

Defines hazard levels (DANGER, WARNING) and provides safety alerts.

Safety Instructions

Offers general guidelines for safe operation and handling of the device.

Diagnostics

Establish Vehicle Communication and Selection

Guides on connecting the VCI to the vehicle and selecting the correct model.

Diagnostics Screen Layout

Explains the interface elements and navigation of the diagnostic screen.

Auto Scan

Details the process of automatically scanning all vehicle systems for faults.

Control Unit

Explains how to navigate and select specific vehicle control units for testing.

Trouble Codes

Covers reading and clearing diagnostic trouble codes (DTCs).

Live Data

Describes how to view real-time data parameters from the vehicle's ECU.

Special Functions

Lists and explains various component adaptation and coding functions.

Programming and Coding

Details the process of updating vehicle ECU software and reprogramming components.

Generic OBDII Operations

Explains how to perform standard OBDII/EOBD diagnostics.

Intelligent Diagnostics

Accessing Intelligent Diagnostics Function

Intelligent Diagnostics Operation

Service

Oil Reset Service

Electric Parking Brake (EPB) Service

Battery Management System (BMS) Service

Settings

VCI Manager

Wi-Fi Connection

VCI Bluetooth Pairing

VCI Update

Battery Test

MaxiBAS BT506 Tester

Test Preparation

In-vehicle Test

Out-vehicle Test

Support

Maintenance and Service