16
3 Getting Started
Ensure the tool is connected to the Internet and is sufficiently charged or
connected to a power outlet (See Power Sources on page 10). The
product should avoid the exposure of direct sunlight during the actual
operation of tire tread check and brake disc check.
3.1 Power Up
Press and hold the power button on the tool to switch it on. The system will
boot up and display the TBE200 Job Menu.
Figure 3-1 TBE200 Job Menu
① System Status Icons
② Application Buttons
③ Locator
3.1.1 System Status Icons
As the MaxiTPMS TBE200 runs on the Android operating system, you may
refer to Android documents for additional information.
To Next Page
Loading...
