63
updatable items will be selected automatically. Then click the
Update Selected Items button on the right side of screen.
3) Check the updating process by observing the upper left progress
bar [Downloads] and upper right progress bar [Installs]. You may
also find progress information in the Status column of updated
items.
4) Anytime you could click the Pause button on the right side of
screen to suspend all progresses, and the state of those suspended
items would change to STOPPED.
5) To resume updating process, you may need to select those
suspended items again, and then click the Update Selected Items
button. The progress will resume from the break point.
6) When the downloading is completed, the downloaded programs
will be installed automatically. The new version will replace the
old version.
Single Update
1) Find out the desired updating item and click the Install button in
the same line and the Install button changes to Pause at the same
time.
2) Check the updating process by observing the upper left progress
bar [Downloads] and upper right progress bar [Installs]. You may
also find progress information in the Status column of updated
items.
3) Anytime you could click the Pause button in the line to suspend
this progress, and the state of this item would change to
STOPPED.
4) To resume updating process, click the Install button in the line
again. The progress will resume from the break point.
5) When the downloading is completed, the downloaded program
will be installed automatically. The new version will replace the
old one.
To Next Page
Loading...
