EasyManua.ls Logo

Autel Smart Controller SE - Item List

Autel Smart Controller SE
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
4. Item List
NO DIAGRAM ITEM NAME QTY
If used improperly, the aircraft may cause injury and damage to
people and property. Please be cautious while using it. For details,
please refer to the aircraft’s disclaimer and safety guidelines.
Before each flight, make sure that the controller is fully
charged.
Ensure the controller antennas are unfolded and adjusted to
the appropriate position to ensure the best possible flight
results.
If the controller antennas are damaged, it will affect the
performance. Please contact the after-sales technical support
immediately.
• If the aircraft is changed due to damage, it needs to be relinked
before use.
• Make sure to turn off the aircraft power before turning off the
controller each time.
• When not in use, make sure to fully charge the controller every
three months.
Once the power of the controller is less than 10%, please
charge it to prevent an over-discharge error. This is caused by
long-term storage with a low battery charge. When the
controller will not be in use for an extended time, discharge the
battery between 40%-60% before storage.
Do not block the vent of the controller to prevent overheating
and diminished performance.
• Do not disassemble the controller. If any parts of the controller
are damaged, contact Autel Robotics After-Sale Support.