Need help?Do you have a question about the Autel Smart Controller SE and is the answer not in the manual?
General| Operating System | Android |
|---|---|
| RAM | 4 GB |
| Internal Storage | 64GB |
| Charging | USB-C |
| Charging Time | about 2 hours |
| Operating Temperature | -10°C to 40°C |
| Brightness | 1000 nits |
| Processor | Octa-core |
| Connectivity | Wi-Fi, Bluetooth |
| Supported Drones | Autel EVO II series, Autel EVO Lite series, Autel EVO Nano series |
| Compatibility | Autel EVO series |
Instructions on how to check the controller's battery level using indicator lights.
Guide on turning the controller on and off by pressing the power button.
Steps for charging the controller using the USB-C cable and power adapter.
Guide on how to attach the control sticks to the controller's bases.
How to position the controller antennas for optimal signal transmission.
Procedures for starting the aircraft motors using the command sticks.
Steps for initiating an aircraft takeoff to a specified height.
Instructions for safely landing the aircraft and stopping the motors.
Technical details on operating frequency and maximum transmission distance.
Protocols, operating frequency, and transmitter power for Wi-Fi.
Protocols, operating frequency, and transmitter power for Bluetooth.
Screen resolution, dimensions, frame rate, and touch capabilities.
Battery type, capacity, voltage, operating time, and charging.
Details about the power adapter's input, output, and rated power.
Internal storage, video output, voltage/current, and operating temperature.
Recommended storage temperatures for different durations.
The device's IP rating for resistance to dust and water.
Physical measurements of the controller with antennas folded and unfolded.
List of aircraft models compatible with this controller.
Supported Global Navigation Satellite Systems.
To Next Page