1. Turn off the vehicle’s engine
2. Attach M8 dash cam on the original rear view mirror
3. Plug the car adapter into the cigarette lighter of your vehicle
4. Connect the car adapter’s ending to the mini-USB socket of M8mirror dash cam.
Extra power cables can be tucked in the edges of windshield when you rote the wire.
Note:
1. M8 dash cam working voltage: 5V 1.5A ; Please use standard car charger to supply
the power for M8, or it will cause damage to the device.
2. If M8 shakes slightly, you might try the next slot on the bands, mirror sizes vary a lot.
INSTALLING M8 TOUCH SCREEN DASH CAM
16
To Next Page
Loading...
