7
Adapter #4: If the adapters mentioned above are not suitable for your vehicle, please glue the bracket base on
the windshield by UV glue, then install with mirror.
Attention for replacement of mirror brackets:
If all the adapters and original brackets mentioned are not suitable for your vehicle, please contact our customer
service and we will send you a suitable one.
2. Installing the Detached Front Camera
Find a suitable position to install the detached
front camera on the front windshield, and clean
the place with alcohol and a lint-free cloth.
* For driving safety, please select a position
that does not block the driver's view.
Tear off the tape on the camera, and mount it
on the windshield firmly.
Rotate the camera lens up and down to adjust
the camera angle.
* The front camera can be rotated up and down
by 30 degrees, you can adjust it to find a
suitable angle.
To Next Page
Loading...