Auto Vox T9 Pro - Recording Features

16
Manually power off: Long press the power button for 3 seconds, dash cam will turn off.(dash cam will turn off)
Set the Date and Time
1. Set the Date and Time Manually.
- Tap > > General Settings>Clock Settings.
- Tap / to adjust the value of the selected field.
- Tap and repeat the above steps until all fields have been changed.
2. Automatic Date and Time
-Tap > > General Settings >Time Zone
-Select the appropriate time zone, then press "Yes" to confirm or press "No" to cancel the current selection.
- Go back to>General Settings>GPS Time Sync, click the button on the GPS time sync bar to active auto time adjustment.
Note: Please follow the instructions to install the GPS antenna correctly on the dashboard and connect it to the GPS connector on the power cord.
Record Videos
1. Loop Recording
Loop recording begins after getting power with SD card.The loop recording will be divided into multiple video clips; recording will not stop
between video clips. When there is insufficient space on the memory card, loop recording will automatically overwrite the old files one by one.
The loop recording files are saved in the Normal\F\R folder in the SD card.
-Tap to pause current recording
-Tap to On/Off audio recording
-Time frame for each video file can be set to 1/3/5 minutes.
OK