3
Hold the bottom of the bracket and
find the correct position.
b. Find the correct position and then Install the bracket of the mirror.
Clamp the base and twist the screw
with a wrench or screwdriver.
Done.Adhere to the glass, and push it
to move forward.
1 2 3 4
● Different vehicles require different brackets. It depends on your vehicle model type. Please do not force the mirror out of the bracket. The
manufacturer will not be responsible for the damage to your vehicle caused by the wrong installation.
● Most vehicles such as Toyota, Toyota Crown, Toyota Prado, Honda MPV, Honda CRV, Nissan, Mazda 3 / 5 / 6, Hyundai SUV, Kia SUV, Ford,
new Mitsubishi and Chevrolet do not need adapters when installing the mirrors. Chevrolet does not need an adapter when installing the mirror.
If an adapter is needed, please refer to the following charts for installation.
● If you are not sure which adapter can be used, please send us the pictures of your original mirror bracket via our customer service:
service@auto-vox.com.
To Next Page
Loading...