autocom air - Pairing to a Second Autocom Air Unit

2. PressandholdtheMultifunctionButton(5)untilyouhearasecondbeepandtheindicator
 LEDsashREDandBluealternately.TheAutocomAirisnowreadytobepairedwithany 
 compatibleBluetoothdevice.
3. Onyourmobiledevice,selecttheBluetoothsettingsandscanfordevices.Youwillsee“AKE
 Stealth-HS-NGv3.00”listedasanavailableBluetoothdevice,nowconnecttothisdevice.
4. Ifaskedforacodeword,pleaseenter0000.(ThismayhappeninfuturewhentheAirunit
 requeststoconnecttoyourmobiledevice).
5. TheAutocomAirstopsashingREDandBLUEalternatelywhenpairedsuccessfully.Asingle
 BLUELEDwillthenash.
Pairing to a Second Autocom Air
*This mode of operation can be used in a rider / passenger or bike to bike scenario.
1. StartwiththeAirunitsswitched-offandturnoffallotherBluetoothdevicesnotneededforthe
pairing.
2. PressMultifunctionButton(5)onbothunitsinturnuntilyouhearasecondbeepafterswitch
 onfromtheunitandtheindicatorLEDsashREDandBluealternately.TheAutocomAiris
 nowreadytobepairedwithanycompatibleBluetoothdevice.
3. OneshortpressonMultifunctionButton(5)oneitherAirunitwillnowpairthemtogetherto
form an intercom pairing.
4. TheAutocomAirstopsashingREDandBLUEalternatelywhenpairedsuccessfully.Asingle
 BLUELEDwillthenash.