16
Bluetooth
Pairing a Phone:
When pairing a phone with AutoDAB GO-S for the first time, follow
the below procedures:
1. Press the MODE button until you scroll the screen to
Bluetooth mode.
2. Press and hold the TX/SCAN button to put the AutoDAB GO-S
device into pairing mode. Pairing in Progress will be shown.
3. From your phone, turn on Bluetooth and search for Bluetooth
peripherals. A list of available Bluetooth peripherals will be
displayed.
4. Select CAR DAB in the list and once connection is established,
the Bluetooth screen will display Connected and a Bluetooth
icon will be shown at the top of the AutoDAB GO-S display.
5. In Pairing in Progress mode, if you want to stop searching for
a new phone, you can press the PRESET button to stop
searching and return to the last connected phone.
Note: During the process of re-connecting to the last connected phone,
it may up to one minute for re-connection depending on the model of the
phone. In the reconnecting process, the Bluetooth icon at the top of the
AutoDAB GO-S display will be flashing and the LCD will show Not
Connected.
To Next Page
