17
6. You can disconnect an existing connected phone by pressing
and holding the TX/SCAN button to force the AutoDAB-GO
into pairing mode to connect another new phone.
Note: The flashing of the Bluetooth icon indicates that a
Bluetooth device is not connected. Once it is connected, the
icon will stop flashing.
Manage Phone Call:
1. When there is an incoming call, the AutoDAB GO-S plays a
ringtone. Press PRESET to answer a call. The speaker phone
volume and call duration will be displayed at the bottom of
the screen. You can use the Tuning Knob to adjust the
volume level.
2. Press and hold PRESET to decline a call.
3. To end a call, press PRESET.
Selecting Bluetooth Phone Voice to your Car Stereo through FM
Transmitter or Built-In Speaker:
1. Press and hold MENU button to enter menu.
2. Use the Tuning Knob to scroll down the menu and select
Phone Speaker Setting. Press MENU button to confirm.
To Next Page
