18
3. Use the Tuning Knob to select Built-in Speaker or Car Speaker
and confirm by pressing the MENU button again. You will
then be returned back to the source you were previously on.
4. Use the Tuning Knob to adjust the voice volume to the
desired level when it is in Built-in Speaker mode.
5. When in Car Speaker mode, the voice volume can only be
adjusted by the car stereo volume control button. Car
Speaker will be displayed at the bottom of the AutoDAB GO-S
screen.
Note: When the Car Speaker is selected, the phone voice can be
input into car stereo by either using AUX OUT or FM Transmitter.
Bluetooth Music Playback
FM transmission Mode
1. Ensure Bluetooth mode is selected and a phone is paired.
Select the music file from your phone and select playback via
Bluetooth (Refer to your phone user guide for more
information).
2. Make sure you have selected AUX IN mode by pressing and
holding the MENU button to enter menu mode. Use the
Tuning Knob to scroll to AUX IN/OUT Select and confirm by
pressing MENU again. Use the Tuning Knob to select AUX IN
and confirm by pressing MENU button.
To Next Page
