19
3. Press TX/SCAN button to enter FM transmitting frequency
selection mode,
4. Then use the Tuning Knob to select your desired vacant
frequency
5. Press PRESET button to play or pause the music playback.
6. Use the Tuning Knob to select next or previous songs.
Note
A. Once your phone is paired to the AutoDAB GO-S, the
connection between both devices will be automatically
re-established each time you enter your vehicle if the
AutoDAB GO-S is powered on. AutoDAB GO-S automatically
connects itself to the last phone you used with it. If you want
to connect AutoDAB GO-S to another phone you already
paired but not the last one, you have to first disconnect the
last phone by selecting Forget this Device in your phone’s
Bluetooth Settings menu. Then press and hold the TX/SCAN
button to enter pairing mode again.
B. You can pair up to eight Bluetooth devices with AutoDAB
GO-S.
To Next Page
