Automated Logic ZS Plus User Manual

Using ZS Sensors
ZS Sensors are thermistor-based temperature sensors that can optionally sense humidity and either
CO
2
or VOC. ZS Sensors communicate with the HVAC system through the Rnet.
A ZS Sensor's functionality is determined by:
• The sensor model
• The sensor's sensing capabilities (temperature, humidity, CO
2
, VOC)
• The control program that runs the associated equipment
See the referenced page below to learn what you can see and do with each of the ZS sensor models:
ZS Standard (page 1)
ZS Plus (page 2)
ZS Pro (page 3)
ZS Pro-F (page 7)
ZS Standard Sensor
A ZS Standard sensor has no user controls.
ZS Sensors ALC Proprietary and Confidential © 2015 Automated Logic Corporation
Rev. 4/27/2015 All rights reserved
1

Automated Logic ZS Plus Specifications

General

Brand	Automated Logic
Model	ZS Plus
Category	Accessories
Language	English