Technical Data
Substrate Fe: steel or iron
NFe: non-ferrous metallic substrates as
aluminum, zinc, copper, brass,
stainless steel
Measuring Range 0.0 – 5000 μm or 0.00 – 200 mil
convertible by slide or by software
Display of Values from 0.0 – 999 in μm
from 1.00 – 5.00 in mm
or from 0.00 – 200 in mil
Resolution 0.1 μm in the range of 0.0 – 99.9 μm
1 μm in the range of 100 – 999 μm
0.01 mm in the range of 1.00 – 5.00 mm
or 0.01 mil in the range of 0.00 – 9.99 mil
0.1 mil in the range of 10.0 – 99.9 mil
1 mil in the range of 100 – 200 mil
Repetitive accuracy ± (1 μm + 2% of reading) in the range
of 0 – 999 μm
+ 3.5% of reading in the range
of 1000 – 5000 μm
Minimum object size 10 x 10 mm
2
or 0.4" x 0.4"
Minimum curvature 5 mm convex or 0.2"
25 mm concave or 1.0"
Minimum substrate Fe: 0.2 mm or 8 mil
thickness NFe: 0.05 mm or 2 mil
Temperature range storage –10°C – 60°C (14°F – 140°F)
operating 0°C – 50°C (32°F – 132°F)
Display Digital (LCD)
Probes One-point, integrated
Power supply 9 Volt E block alkaline
Dimensions 166 mm x 64 mm x 34 mm
incl. probes (6.5" x 2.5" x 1.3")
Weight 130 g (4.6 oz) incl. battery
Optional: Memory capacity up to 3900 values
Blocks up to 999
Interface RS 232
To Next Page
Loading...
Need help?
General
