Automationdirect.com GS1-20P5 - Page 92

Communication Parameters Summary (cont.)
GS1 Series AC Drive User Manual
5–3
Chapter 5: GS1 MODBUS Communications
Communications (cont.)
GS1
Parameter
Description Range Default
쏆쏆
9-26
RS485 Speed Reference 0.0 to 400.0 Hz 60.0
쏆쏆
9-27
RUN Command 0: Stop 1:Run 0
쏆쏆
9-28
Direction Command 0: Forward 1:Reverse 0
쏆쏆
9-29
External Fault 0: No fault 1:External fault 0
쏆쏆
9-30
Fault Reset 0: No action 1:Fault Reset 0
쏆쏆
9-31
JOG Command 0: Stop 1:Jog 0
9-41
GS Series Number
1: GS1
2: GS2
3: GS3
4: GS4
##
9-42
Manufacturer Model Information
0: GS1-10P2 (120V, 1ph, 0.25HP)
1: GS1-10P5 (120V, 1ph, 0.5HP)
2: GS1-20P2 (230V, 1ph/3ph, 0.25HP)
3: GS1-20P5 (230V, 1ph/3ph, 0.5HP
4: GS1-21P0 (230V, 1ph/3ph, 1HP)
5: GS1-22P0 (230V, 3ph, 2HP)
##
쏆쏆
Parameter can be set during RUN Mode.