Chapter 5 - System Setup Screens
5-18
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Setting Menu
The Setting Menu is used to adjust the time & date,
adjust the contrast or brightness of the display, enter the
IP address settings, adjust (calibrate) the touch screen,
enable or disable the internal beep and turn on and off
the mouse cursor .
Item No. Function Description Comments
1 Adjust Clock
Press to go to the Adjust Clock screen.
2 Adjust Display
Press to go to the Adjust Display screen.
3 IP Address
Press to go to the IP Address screen
The IP Address can also be set from
the programming software or by the
project.
4 Adjust Touch Panel
Press to go to the Adjust Touch Panel screen.
5 Beep
Press to go to the Beep screen.
6 Mouse
Press to go to the Mouse screen.
7 Main Menu
Press to return to the Main Menu screen.
4
321
5 6
7
To Next Page
Loading...